Subject: Smiths speedo repair
Smiths instruments used a subsiduary company called Thomas Richfield to make the
instruments, they now trade in there own right as ;-
Richfield, Rolleston Drive, Arnold, Nottingham, NG5 7JR. Telephone 0115 926
4235.
Very good company.
Regards
Chris
)Received: by alpine.b17a.ingr.com (5.65c/1.921207)
(1.37.109.16/15.5+ECS 3.3) id AA114445654; Mon, 29 Jan 1996 12:00:56 -0800
(1.37.109.16/15.5+IOS 3.22) id AA055265596; Mon, 29 Jan 1996 11:59:56 -0800
From: Roland Dudley <cobra@cdc.hp.com>
Subject: Re: Smiths speedo repair
To: rabernat@freedom.NMSU.Edu (Robert L. Abernathy)
Date: Mon, 29 Jan 96 11:59:55 PST
> Can these gears be replaced or do I need a new
> speedometer? Is Smiths still in business?
>
> The speedo is sn 9818/26 94O, if that helps.
>
> Robert
>
>
Brooklands, Inc claims to sell "original Smiths Instruments".
Unfortunately the part numbers in their catalog are their own so I can't
tell if they have what you are looking for.
You can order a catalog by calling 305-776-BRIT
Roland
ØReceived: by alpine.b17a.ingr.com (5.65c/1.921207)
Date: Mon, 16 Oct 1995 12:38:11 -0700
To: alpines@autox.team.net
From: ritfam@mcn.org (Ritchie Family)
Subject: Pegasus Auto Racing Supplies
I'm writing this to let you all know about this neat catalog I just
recieved from pegasaus racing. It's full of things that I think sunbeam
people could use. They have jets for the Weber 32/36 DGV carb., they also
have master cylinders from Girling and Lockheed that look almost exactly
like our sunbeam ones, only
cheaper. These are just a couple of the tons of cool stuff in their
catalog. So if anybody is interested.
PEGASUS AUTO RACING SUPPLIES,INC.
2475 South 179th Street
NEW BERLIN, WISCONSIN 53146
1-800-688-6946
ARMAND RITCHIE
B395014212
xReceived: by alpine.b17a.ingr.com (5.65c/1.921207)
From: DSand95510@aol.com
Date: Tue, 27 Feb 1996 21:22:40 -0500
To: alpines@autox.team.net
Subject: Re: Engine Work
In a message dated 96-02-26 13:09:47 EST, tjhiggin@alpine.b17a.ingr.com (T.J.
Higgins) writes:
> I am also having difficulty in finding a suitable cam. Any
>> suggestions?
>
>Can't help you with the piston question, but others on this list have
>recommended Delta Cams in Tacoma, Washington. I haven't used them,
>but plan to call them when the time comes; my Series V cam is in very
>bad shape. Sorry, I don't have a phone number for them.
Delta Cam's phone # : 206-383-4152 or 206-572-2769(fax) They have numerous
1592 and 1725 grinds available. Cost was about $40-45 plus freight with two
day turnaround.
Dick Sanders
Seattle, WA
P.S. I took in a stock cam for grinding which appeared to be in good
condition. Don't know what they do with ones "in very bad shape."
ú Received: by alpine.b17a.ingr.com (5.65c/1.921207)
Date: Thu, 9 Nov 1995 14:19:46 -0800
To: alpines@autox.team.net
From: ritfam@mcn.org (Ritchie Family)
Subject: Re: Fuel Tanks
> Hey everybody,
>
> Some food for thought over the long weekend.
>
> Is it just me..........or does the "piecemeal" fuel tank setup on the
> later Alpines and (all) Tigers make anyone else nervous ??
>
> I mean, the way the setup is now, it's just seems too vunerable to
> rear/ left rear / right rear impacts. I personally think I'd feel
> better if the fuel tank was tucked away from the extremeties of the
> car.
>
> Has anybody on the list ever replaced the fuel tanks on these cars
> with something a little more modern and potentially safer ?
> A fuel cell maybe.
>
> I'd be interested in doing something like that with the following
> constraints:
>
> 1) Fuel capacity would be greater than or equal to the present
> capacity.
>
> 2) A sending unit could be mounted that would operate the stock fuel
> gauge.
>
> 3) It didn't reduce the overall trunk capacity. ( Reconfigure is ok,
> just not reduce. ) And still be able to carry a spare tire.
>
> 4) Fuel filler would be accessable without opening the trunk.
>
> Yeah, I know. A tough list to fulfill to be sure. But.......hey....
> It never hurts to ask.
>
>
> Rick Fedorchak
Rick, I agree about the fuel tanks on the later alpines and tigers being
unsafe. I have also thought about replacing mine with a fuel cell. I just
recieved a catolog from PEGASUS AUTO RACING SUPPLIES
2475 South 179th Street
New Berlin, WI 53146-2150
1-800-688-6946 (PH)
1-800-742-0484 (FAX)
they have some ready made fuel cells available in the catalog, along with
other neat stuff.
Also in grassroots motorsports magazine there is and add for fuel cells,
they have a catolog that's free.their address is AIRCRAFT RUBBER
MANUFACTURING, INC.
18062 Redondo circle
HUNTINGTON BEACH, CA 92648
800-433-6524
they also go under the name of FUEL SAFE RACING CELLS. I don't have their
cat. yet so I can't advise about them. If you find out anything neat from
them let me know.
ARMAND RITCHIE
B395014212
Received: by alpine.b17a.ingr.com (5.65c/1.921207)
From: Slopes3688@aol.com
Date: Tue, 12 Dec 1995 00:17:55 -0500
To: DARRYL@c3177208.ssr.hp.com
Subject: Keyless/Clueless
In the November, 1995, issue of The British Registry (Vol 2 No.11), you can
find "original British keys cut by code." Contact Pete Groh, British Triumph
& Metropolitan, 9957 Frederick Rd., Ellicott City, MD 21042. (410) 750-2352.
He sells original British keys for $10.
Give it a try. Also, subscribe to The British Registry. It's a great source.
Steve Lopes, Lawrence, KS
aka 200KTR7
&Received: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
From: CMeinel464@aol.com
Date: Mon, 24 Jun 1996 22:17:18 -0400
To: Alpines@autox.team.net
Subject: New Alpine Member
Fellow Alpine Owners,
Just subscribed to the Alpines mailing list, looks great, glad to be able
to talk to other owners.
I thought I'd let you know a little about myself. I'm an original owner of
a 1967 Alpine V which I bought for $2,460 in September 1967. Our Alpine is
black on black and now has about 64,500 on the odometer.
Over the years I've owned 16 Alpines and Tigers and currently have my
original Alpine and a 1966 Tiger Ia which is red with balck interior.
In 1976 I started "Classic Sunbeam Auto Parts" as a response to the lack of
parts on the market. As many parts went unavaialble, we started a parts
reproduction program that as of today produced over 50 parts. In the
begining it was rubber trim and some chrome items and our most recent items
included the front amber and clear lenses, the rear upper lenses in amber
and red and the rear lower lense for the Alpine IV,V and Tigers. Our parts
are supplied world wide to both owners as well as other Sunbeam parts
suppliers. As a Alpine/Tiger owner myself, I make an effort to make all of
our repoductions to the highest standard of quality.
If I can be of any help in answereing your tech-problems or if you would
like our free catalog, please feel free to contact me.
Best regards,
Curt R. Meinel
1967 Alpine V, B395004108
1966 Tiger Ia , B382001014
Classic Sunbeam Inc.
CMeinel464@aol.com
1-800-24-SUNBEAM
áReceived: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
From: nyclewit@nyhp03.serigate.philips.nl
Date: Thu, 29 Aug 1996 12:28:24 +0200
To: alpines@autox.team.net
Subject: Alpine part suppliers (UK)
-------------------------------------------------------------------------------
To: alpines@autox.team.net
From: Bert Clewits nyclewit@nyhp03.serigate.philips.nl
Subject: Alpine part suppliers (UK)
-------------------------------------------------------------------------------
Hi folks,
When I was in Britain with my Alpine on the 96 international there
were a lot of Alpine parts suppliers, I've compiled the addresses
(They all have catalogues, hint, hint !)
Alpine parts suppliers:
Sunbeam Supreme
Memorylane, Leicester
LE1 3UL
tel (00-44)-0116-2536214
fax (00-44)-0116-2513231
Classic Car Developments
The old surgery
Grimesgate, Diseworth
Derby DE74 2QD
tel/fax (00-44)-01332-850856
Tiger Alpine spares
1 Firswood road
Lathom, Skelmersdale
Lancashire, WN8 8UP
tel (00-44)-01695-721849
fax (00-44)-01695-50661
Berkshire Alpine Centre
The Warren
Wantage road
Hungerford Newton
Berkshire RG17 0PN
tel (00-44)-01488-686773
fax (00-44)-01488-686774
Alpine West Midlands
The Firs
Stratford road
Hockley Heath
Solihull B94 5NJ
tel (00-44)-01564-783222
fax (00-44)-01564-782649
-------------------------------------
Hope this is of any help !
Bert Clewits
'64 Alpine S IV GT OD moonstone white
‰ Received: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
Date: Mon, 16 Sep 1996 20:07:44 -0400
From: "mark r. alexander" <104320.2601@compuserve.com>
Subject: Copy of: Parts Mart
"(unknown)" <VINTAGE-RACE@autox.team.net>,
"(unknown)" <AUTOX@autox.team.net>,
"(unknown)" <BRITISH-CARS-PRE-WAR@autox.team.net>,
"(unknown)" <LAND-ROVER-OWNERS@LAND-ROVER-TEAM.NET>,
"(unknown)" <MGS@autox.team.net>, "(unknown)" <MORGANS@autox.team.net>,
"(unknown)" <MORRIS@autox.team.net>,
"(unknown)" <RILEY@autox.team.net>,
"(unknown)" <TIGERS@autox.team.net>,
British Cars Mailing Lis <ALPINES@autox.team.net>,
VTR List <VTR@autox.team.net>, Triumphs List <TRIUMPHS@autox.team.net>,
BritCars List <BRITISH-CARS@autox.team.net>,
"Carl Musson (EVENTS)" <musson@arts.usf.edu>
---------- Forwarded Message ----------
From: mark r. alexander, 104320,2601
TO: (unknown), INTERNET:TIGERS@AUTOX.TEAM.NET
(unknown), INTERNET:RILEY@AUTOX.TEAM.NET
(unknown), INTERNET:MORRIS@AUTOX.TEAM.NET
(unknown), INTERNET:MORGANS@AUTOX.TEAM.NET
(unknown), INTERNET:MGS@AUTOX.TEAM.NET
(unknown), INTERNET:LAND-ROVER-OWNERS@LAND-ROVER-TEAM.NET
(unknown), INTERNET:BRITISH-CARS-PRE-WAR@AUTOX.TEAM.NET
(unknown), INTERNET:AUTOX@AUTOX.TEAM.NET
(unknown), INTERNET:VINTAGE-RACE@AUTOX.TEAM.NET
(unknown), INTERNET:MINI-LIST@AUTOX.TEAM.NET
British Cars Mailing Lis, INTERNET:ALPINES@AUTOX.TEAM.NET
BritCars List, INTERNET:BRITISH-CARS@AUTOX.TEAM.NET
Triumphs List, INTERNET:TRIUMPHS@AUTOX.TEAM.NET
VTR List, INTERNET:VTR@AUTOX.TEAM.NET
"Carl Musson (EVENTS)", INTERNET:musson@arts.usf.edu
DATE: 8/15/96 1:25 PM
RE: Copy of: Parts Mart
Hi all,
I just have to share this find --[ insert usual disclaimers, i do not work
Tucked away in sunny Fort Lauderdale is a treasure throve of used British
Car parts. Over the years Joe Peters, of Imported Auto Emporium
bought\serviced\sold all makes and models of britcarsand has collected
a few various bits.
He has wooden steering wheels, mag wheels, carbies, seats, engines and
engine parts to name a few.
To the best of my knowledge he will even mail\ship parts.
Interested ? Contact JOE 954-561-1199
ICEBERGnKADIR
Received: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
From: "Russell Maddock" <rmaddock@petrie.starway.net.au>
To: "Chris Stephenson" <cstephenson@dttus.com>
Subject: Re: Hood Badge
Date: Tue, 24 Dec 1996 21:24:18 +1100
Chris Stephenson wrote:
> I need a hood badge for my series III. The one that is currently
> attached is the all metal type. As I understand, the correct badge
is
> plastic and is embedded in a metal cradle. I do have the metal
cradle,
> but not the actual plastic badge. Can anyone help?
PG & BS Rudland (39 Cashel Crescent, Killarney Heights, NSW 2087, Australia
Ph +61-2-9451 0576) had the inserts for this badge listed in their April
1990 catalogue. Price then was A$27, stock code ET63. They could be worth a
try.
Russ Maddock
ˆReceived: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
From: lallegrucci@westpub.com
Date: Sun, 28 Jul 96 01:02:43 -0600
Subject: Weatherstripping
To: alpines@autox.team.net, alpines@autoxteam.net
Somebody wanted the number for Soffseal weatherstripping to get one of there
catalogs. Its (513) 367-1746.
Brian Corrigan
Received: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
From: schotbus@mail.cyberenet.net
To: tigers@autox.team.net, alpines@autox.team.net
Date: Sat, 11 Jan 1997 02:39:56 +0000
Subject: FOUND: 1 Rob Martel - kind of
Priority: normal
Yesterday I successfully tracked down North America's most talented
and infamous manufacturer of Sunbeam repair panels, Mr. Rob Martel of
Rob Martel Enterprises, Alliston, Ontario. Don't know who this guy
is? Check out his catalog in the suppliers section of the Tiger web site.
It seems Rob has gotten a bit burned out on making panels and has
decided to take a sabbatical for a few months. Hence, he has had his
shop phone turned off. (He said he was being interrupted continually
and couldn't get any work done.)
For those of you who have gotten to the point in their restorations
where they need top quality panels from Rob, it is possible to get
them. You have two choices:
1. Contact Rob by mail at his shop address: 9-171 Dufferin St. S.,
Alliston, ON L9R 1E7, CANADA. All inquiries will be promptly
answered. He has a large quantity of rockers and other popular panels
that should last through his sabbatical.
2. Purchase panels from Doug Jennings at Tiger Auto in Dayton, OH
(phone 513-252-3317). He has stockpiled a small quantity of panels
on Rob's behalf and is selling them for exactly what Rob sells them
for.
Cheers,
Gary Schotland
Tigers East/Alpines East
WReceived: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
Date: Tue, 08 Apr 1997 19:31:34 +1300
From: Karl Gilchrist <xtr25618701@xtra.co.nz>
To: Andreas.Pils@SKF.COM
Subject: Re: steering wheel - spare part needed
Andreas,
Sorry my spare steering wheel is already spoken for. However if its any
help I restored my steering wheel hub by filling the cracks with
fibreglass filler, sanding it smooth and then repainting it.Looks as
good as new. If its really beyond repair I suggest you contact the
Rapier Owners Club as the steering wheel is the same in Series 3-5
Rapiers and a lot more of those get wrecked than Alpines. Karl
ëReceived: from triumph.cs.utah.edu by alpine.b17a.ingr.com (5.65c/1.921207)
Date: 24 Apr 97 16:23:00 EDT
From: Scott Christie <103226.3155@CompuServe.COM>
To: Terry McKitrick <tmckit@connect.ab.ca>
Subject: Re: whitewall tires
Terry - the Alpine Sean Connnery drove in Dr. No was a Series II. As for the
fake white walls, I have a set on my Series 3 and they look GREAT!. They were
purchased from Coker Tire, and are still available for $26.95 for all four.
They add a two inch whitewall to the tire. They are not glued on, they just fit
REALLY SNUG. Your tire mounter has to be careful getting them and the tire onto
a wire wheel properly, but once fit, I have had no problem with them. Because
of their snug fit you cannot tell they're fakes until you walk up and try to get
your fingernail underneath. You can reach Coker at 1-800-251-6336 or for
International calls 423-265-6368.
Scott Christie
Series 3 Alpine Registry
îReceived: from ciao-intranet ([129.135.4.2]) by alpine.b17a.ingr.com (5.65c/1.921207)
Date: Tue, 29 Jul 97 18:31:29 PDT
From: Tim Stiffy <tstiffy@pulsenet.com>
Subject: RE: Stainless Nuts and Bolts
To: Kurt Eckert <eckert@tfn.com>, alpines@autox.team.net
Kurt,
I picked up a catalog at the Carlisle Import Car Show last year from
Specialty Custom Chrome Fasters, Inc. They sell chrome plated and stainless
fasteners in both metric and inch and no minimum order. Free shipping on
orders over $40. Their catalog includes springs, screws, bolts, nuts, and
even chrome muffler clamps. I haven't done any business with them, sounds
good. There phone is (517) 548-5778 and fax is (517) 548-5780. Mailing
address is PO box 179,Brighton, MI 48116.
Good luck,
Tim Stiffy
Series I Alpine
---------------Original Message---------------
All,
During the rebuild of my Series III, I am replacing all nuts and bolts with
ones
made of stainless. I have placed a large order for an assortment of said
items.
Unfortunately this only solves part of the problem. There are still a large
number of longer/larger bolts that must be replaced and I have no desire to
order a box of 100 of one particular size. Does anyone know of an
inexpensive
mail-order place to by stainless fasteners? I am willling to place a large
order
but it would be a lot of different sizes.
Thanks,
Kurt Eckert
Series III GT
----------End of Original Message----------
]Received: from tibalt.supernet.ab.ca [198.161.21.5] by in2.ibm.net id 877087491.220862-1 ; Fri, 17 Oct 1997 11:24:51 +0000
To: alpines@autox.team.net
From: A.G.Whiteford@gcal.ac.uk (Andy Whiteford)
Subject: CCD - their Alpine / Tiger repair panels list
Date: Fri, 17 Oct 1997 12:23:19 +0100
These are the panels that Classic Car Developments list, 1997. I'm not
including the prices, and all the other UK suppliers do a similar range.
I'm sure Curt could order anything for you in the US, as opposed to making
expensive & unproductive transatlantic calls.
No, I don't work for them.
This ain't an advert, just an example of what's available, and often
required, this side of the pond, sheet-metal-wise.
Remember: European settlers brought *rust* to the USA, but we invented Iron
Oxide and nobody makes more of it, better and faster than British car
manufacturers.
(..er..apart from the Italians, that is. Have you ever seen a rust-free
Alfa Romeo?)
Front wing complete as factory
Front wing minus front fillet piece
Front wing fillet piece
Headlamp repair ring
Front wing end section between door and windscreen S.IV & V only
Front wing lower half with complete arch
Front wing channel approx. 1m long along edge of bonnet
Headlamp & nose section complete
Headlamp nose section only
Front wing lower rear repair
Outer sill as original without step S.I,II,III & IV
Outer sill as original without step S.V
Outer sill step as factory
Sill with step as factory panel
Middle sill as factory
Middle sill lower half
Sill inside car as factory panel with cable recesses and footwell bulge
Top angle channel for inner sill
Rear wing front repair section S.I,II,III,IV
Rear wing front repair section SV
Rear wing wheel arch
Rear wing front repair section with complete arch
Rear wing front repair section with complete arch and rear lower quarter up
to SIII
As above - SIV&V
Rear wing complete as factory up to SIII
As above - SIV & V
Rear wing rear quarter SI,II,III,IV & V
Rear valance as factory SI,II,III (this include part of the rear light
assembly)205
Rear valance as factory repair panel SIV & V
Rear valence corner repair panel
Front valance complete as factory
Front valence top panel
Front valance skirt
Grill fillets - each side behind grill
Door skin lower repair SI,II,III & IV
As above - SV
Door skin complete
Door lower inner repair
Rust free second hand doors from
Boot skin repair section
Boot skin complete
Rust free secondhand boot lids from
Boot floor
Spare wheel carrier
Front nose rail connecting front wings
Bonnet hinge panel
Complete car nose section comprising: 2 x 2b, I x 1b, I x 16a, I x 11,
2 x 11c ready assembled to fit
Front inner wing panel as factory
Front wheel arch panel as factory
Rear inner wheel arch outer section as factory
Rear inner wheel arch inner section as factory
Front scuttle outer skin as factory Sl,II,III & IV
As above SV
Hand brake mounting panel as factory
Boot chassis leg covers as factory
Rear chassis leg side covers under car
Rear chassis leg~ - 18 ins long including hanger and jacking point
Rear chassis leg complete
Rear chassis leg front spring hanger
Cruciform complete as factory
Cruciform front repair section
Cruciform rear repair section
Cruciform rear outrigger to sill
Cruciform bridge box outer repair section
Front jacking point repair sections
Front chassis leg complete
Soft top bin hinge brackets (a pair)
A post lower repair
Door pillar to wing fillet
Valance mounting panel inside boot
Boot floor comer pieces
Rear scuttle panel in front of boot lid as factory
Battery box
Radiator mounting panel
Soft top flaps - second hand (a set)
Rust free windscreen frame
Service / exchange repaired windscreen frame
Secondhand bonnet - from
Bonnet skin with louvres
Secondhand steel hardtop - from
Hard top SI & SII - from
Hard top SIII,IV & V (fibreglass)
Front floor panel - machine pressed as factory
Front floor panel - factory pressed (floor section only)
Rear floor panel as factory
Front wing nose bottom 3" around indicator
Seat mounting rails as factory
yep, looks a bit like the "parts required" list for my series III :-(
have a pleasant weekend, folks
Andy & Rusty
wReceived: from tibalt.supernet.ab.ca [198.161.21.5] by in7.ibm.net id 880031663.173032-1 ; Thu, 20 Nov 1997 13:14:23 +0000
To: alpines@autox.team.net
From: A.G.Whiteford@gcal.ac.uk (Andy Whiteford)
Subject: RE: Upper Fulcrum Pins
Date: Thu, 20 Nov 1997 13:15:12 +0000
Kurt wrote:
>Who are the reputable dealers in the U.K.? I don't mind having to go
>overseas to
>get these things. At this point, I would just like to get some. I have been
>looking for several months now and have had no luck.
-------=---------
Aside from the Alpine/Tiger specialists, there's
one company 'listers' might not know about:-
R.J. Grimes (Coulsdon) Ltd
Hadleigh Garage, Marlpit Lane,
Coulsdon, Surrey, CR5 2YE
tel 0181 668 1455 fax 0181 668 6752
they are "parts specialists for Rootes vehicles, going back to 1930s"
they advertise "worldwide mail-order"
the 'practical classics' magazine people have been dealing with them for years.
p.s. they don't have a catalogue:-
it's best to know what you want, ideally with part numbers.
I don't know if anybody in US/canada has any experience of dealing with
them. (Tom ??)
cheers, Andy
àReceived: from tibalt.supernet.ab.ca [198.161.21.5] by in2.ibm.net id 884156875.68554-1 ; Wed, 07 Jan 1998 07:07:55 +0000
Date: Tue, 06 Jan 1998 22:57:47 -0800
From: Steve Sage <rootes@ix.netcom.com>
To: Alpine Mailing List <alpines@autox.team.net>
Subject: Overdrives and Unitrax
Hello Scott And Everyone:
I called Unitrax today at (714)630-4327 and spoke to Norm, I believe,
their manager. The good news: They do make overdrives. The bad news:
They won't fit Alpines. He seemed knowledgable and said the unit they
make fits in the driveline between the transmission and the
differential. Unfortunately, it's too long for the distance involved in
an Alpine. They do not have what we'd call a conversion kit for standard
transmissions to be changed to OD. Too bad.
If I understood clearly, they do supply replacement gears and parts for
Laylock overdrives so those of you lucky enough to already have ODs may
save some money having a ready source for parts.
Steve Sage
†Received: from tibalt.supernet.ab.ca [198.161.21.5] by in3.ibm.net id 891558244.75316-1 ; Thu, 02 Apr 1998 23:04:04 +0000
with Novell_GroupWise; Thu, 02 Apr 1998 18:04:57 -0500
Date: Thu, 02 Apr 1998 18:05:02 -0500
From: Tim Tilton <TTILTON@co.sarasota.fl.us>
To: jerome@supernet.ab.ca
Subject: Re: compression, pistons and octane rating -Reply -Reply
Here is the information on Venolia.
Venolia Pistons and Rods
2160 Cherry Industrial Circle
Long Beach, CA 90805
562-531-8463 Phone
562-633-9439 FAX
I order the parts at "dealer" pricing. Even the next step up seemed
reasonable. These are forged racing pistons with high strength pins.
Part Price
No. Total Description
11010 230.40 Sunbeam 1725, 3.240 bore
M1000 12.48 Pin Fit
8620-940 33.60 Piston Pins
2500 43.20 Top Compression 1/16 Moly ring under 4"
2800 19.20 2nd Wiper Ring 1/16 under 4"
2904 26.16 Oil Rings 3/16 standard
15.14 UPS
TOTAL 280.18
¹Received: from newmarket.imag.net [204.244.225.33] by in3.ibm.net id 896958679.44952-1 ; Thu, 04 Jun 1998 11:11:19 +0000
To: alpines@autox.team.net
From: A.G.Whiteford@gcal.ac.uk (Andy Whiteford)
Subject: uk SAOC & parts suppliers e-mail addresses
Date: Thu, 4 Jun 1998 12:10:21 +0100
new Alpine Horn 115 has arrived.
it seems tout-le-monde is getting e-mail addresses
---------------------
SAOC "Alpine horn" editor, Peter Graham
imc@codetel.net.do
(Dominican republic, methinks. lucky guy!
I asked him to join the list ages ago. no reply.
anybody else care to invite him to join us?)
---------------------
SAOC membership secretary
GALAPAS1@aol.com
---------------------
SAOC general enquiries
monkj@bp.com
---------------------
and some suppliers:-
---------------------
Sunbeam Classic Spares: Chris & Julie Draycott:
SUNBEAM T.AOL.COM
or
SUNCLASSIC.AOL.COM
(that's the way they're printed.
I was expecting a "@" or two,
no spaces,
and maybe some lower case letters; I may try and confirm...)
---------------------
Alpine West Midlands Ltd:
alpine.westmids@sunbeam-alpine.co.uk
don't know if the corresponding web-site is up and running or not.
----------------------
(Scott C: your letter re credit card payment is in)
----------------------
'fraid the mag's a wee bit light on material this issue, IMHO.
it's mostly internet downloads, including some photos from
'our' Rootes sites. Don't be mad, Mark & TJ !
Andy, SAOC 4917 J
æReceived: from disco.imag.net [204.244.225.25] by in5.ibm.net id 902204243.1019760-1 ; Tue, 04 Aug 1998 04:17:23 +0000
Date: Mon, 3 Aug 1998 21:16:44 -0700 (PDT)
From: Kevin Meek <kevnmeek@netcom.com>
To: alpines@autox.team.net
Subject: Ball joint dust covers
Kurt - here's the info I got from the previous owner of our
new S3: Just Suspensions, 311 US HWY #46, Fairfield NJ 07004
(973)808-0066. Some measurements have to be taken before
they can provide the covers, and I'm not sure what is required.
If you get a part number from them, please post it here, thanks!
............................................................
Kevin Meek (kevnmeek@netcom.com) Sunbeam Tiger B382002202
Santa Cruz, California Sunbeam Alpine SI B9011324
{
Received: from disco.imag.net [204.244.225.25] by in4.ibm.net id 904830726.96598-1 ; Thu, 03 Sep 1998 13:52:06 +0000
From: "Michael Fisher" <fisher@sphery.onu.edu>
Date: Thu, 3 Sep 1998 09:48:43 -0400
To: alpines@autox.team.net
Subject: Parts Guy
I was driving home last night when I saw a beautiful Series 2 off to the side
of the road. I stopped to talk to the guy and see if he needed help. He was
on his way home to Lisbon, OH from MONTANA in ther Series 2! Said he had lost
the generator a couple of days ago, but other than that everything was running
fine.
He also said he has parted out over 20 Alpines and has many, many parts at his
house. He is not on the internet, but did give me his card with phone number,
etc. I asked him if I could post it to this group and he said sure. Of course
I know nothing about this guy, but he did seem to be quite knowledgeable about
Alpines.
Albert G. Mason
330/424-0236
If any body gets something from him, let us know. He is going to look for a
turn signal/horn switch for mew when he gets home.
--
Mike Fisher
http://sphery.onu.edu/~fisher/
m-fisher2@onu.edu. "The leader has a sense of humor. He is
not a stuffed shirt. He can laugh at
419/772-2740 himself. He has a humble spirit."
419/772-2330 (FAX)
If I knew what I was doing, it wouldn't
Physics Department be research.
Ohio Northern University
525 South Main Street "In science we can't let some guy from
Ada, OH 45810 Podunk have the same vote as Fermi."
"Astronomy compels the soul to look
upwards and leads us from this world to
another."
--------------------------------------------------------------------------------
-Received: from disco.imag.net [204.244.225.25] by in3.ibm.net id 908350771.72114-1 ; Wed, 14 Oct 1998 07:39:31 +0000
Date: Wed, 14 Oct 1998 08:40:02 +0000
To: alpines-list <alpines@autox.team.net>
From: Andy Whiteford <A.G.Whiteford@gcal.ac.uk>
Subject: new Supplier e-mail
R J Grimes (Coulsden), the well known rootes old spares stockist, have an
e-mail address
r.j.grimesuk@btinternet.com
they claim to have many Sunbeam / Talbot / Singer / Hillman etc parts
dating back to the 1930's.
probably best if you've got the part numbers for what you want.
A
y
Received: from disco.imag.net [204.244.225.25] by in7.ibm.net id 912453220.428626-1 ; Mon, 30 Nov 1998 19:13:40 +0000
From: "Christie, Scott E. (CAP, GEFA)" <Scott.Christie@gecapital.com>
To: "'Jay Laifman'" <Jay_Laifman@countrywide.com>, alpines@autox.team.net
Subject: RE: Wire Wheels
Date: Mon, 30 Nov 1998 14:12:53 -0500
British Wire Wheel in Santa Cruz, CA lists them in their catalogue, $220
each for the front and $250 each for the rear. They only say "original for
Sunbeam Alpine" and do not split it out by Series.
Their number is 408-479-4495. I believe they also have a web site but I
don't have the address handy.
Scott Christie
Series 3 Alpine Registry
USA
> -----Original Message-----
> From: Jay Laifman [SMTP:Jay_Laifman@countrywide.com]
> Sent: Monday, November 30, 1998 12:52 PM
> To: alpines@autox.team.net
> Subject: Wire Wheels
>
>
>
>
> "Clunk, clunk." As we have all heard discussed of before, after time our
> hubs get worn down and start clunking. The clunk on my SV is there once
> and a while (of course not now). There was an article in the recent
> British Car on how to look at them to see if they are bad. So, I jacked
> up
> the car and pulled a rear wheel. Sure enough, the ridges are pretty
> pointy
> compared to the flatter tops they say is correct.
>
> I called Rick. He tells me that he cannot get new hubs for SI-SIV
> Alpines,
> but used to be able to get new rear hubs for SV's. He also said that the
> Midget/Sprite hubs will not work. He used to get his rear hubs from a guy
> in Australia. He thinks he can probably still get them. But, they might
> be pricey.
>
> Does anyone know any more about this? Does anyone know of any other
> suppliers? Are people with SI-SIV's really SOL on wire wheel hubs? Does
> anyone have really nice used hubs for any Series? Is there really no way
> to get the Midget/Sprite hubs to work?
>
> I cannot imagine my car without wire wheels.
>
> Jay
>
Received: from disco.imag.net [204.244.225.25] by in1.ibm.net id 917020435.291674-1 ; Fri, 22 Jan 1999 15:53:55 +0000
Fri, 22 Jan 1999 08:54:57 -0700 (MST)
From: "herbeam" <herbeam@cari.net>
To: "Alpines AutoX Team" <alpines@autox.team.net>
Subject: Hard to Find Parts and Services
Date: Wed, 22 Jan 1992 07:49:15 -0800
charset="iso-8859-1"
Smittys Sunbeam
2985 "K" St
San Diego, Ca. 92101
(619) 233-7937
Smitty has just about every kind of used part you could think of for
Sunbeams, Hillmans and Rapiers and offers expert welding and repair service
Currently Smitty's good deals are on Overdrive Transmissions, Cylinder Heads
and Power Brake Boosters.
A Complete Series V Overdrive Transmission that has been torn down,
inspected, all worn parts replaced, new gaskets is offered at $1000.
A Rebuilt Power Booster is offered at $250 exchange.
A Cylinder head that has corroded out water passages resulting in leaking or
blown head gaskets can be heliarc'd and machined to as new specs for only
$175.
If theres something you can't find or somebody to to it call Loren Smith
(Smitty)
Be sure to save his Name and Address....he is always willing to offer
technical expertise over the phone at no charge.
ÃReceived: from disco.imag.net [204.244.225.25] by in6.ibm.net id 917757884.100644-1 ; Sun, 31 Jan 1999 04:44:44 +0000
Sat, 30 Jan 1999 21:43:58 -0700 (MST)
From: CMwell@aol.com
Date: Sat, 30 Jan 1999 23:41:18 EST
To: alpines@autox.team.net
Subject: Bleeder screws
Sometime ago we were talking about one-man brake bleeders. I recently
purchased a set of Russell Performance Speed Bleeder Screws. I've just
installed them and tried them out. They work excellent! All you need to do
is to open them a quarter turn and pump the brakes. They have a spring loaded
check valve that doesn't allow air back in. Easy one-man bleeder. If you
are interested, the part number is 3959 and contact Russell Performance at
1-800-217-3701. They will put you in touch with a local dealer in your area.
Curt
CMwell@aol.com
¶ Received: from disco.imag.net [204.244.225.25] by in1.ibm.net id 918996292.101882-1 ; Sun, 14 Feb 1999 12:44:52 +0000
Sun, 14 Feb 1999 05:42:44 -0700 (MST)
From: TIGEROOTES@aol.com
Date: Sun, 14 Feb 1999 07:40:29 EST
To: alpines@autox.team.net, tigers@autox.team.net
Subject: Re: Clocks
Patrick,
Regarding determining voltage polarity on a Smith's clock, I am not certain
that it matters! When voltage is applied to the clock, it energizes a coil
(electromagnet) that causes the associated mechanism to move or swing thru its
travel, pushing against a spring. Near the end of its travel a set of
contacts are opened, and this disconnects the coil, which turns off the
electromagnet, and allows spring to return the mechanism to (actually past)
its starting point, and in this process the contacts are closed, the coil is
energized, and the cycle repeats. I have tested Smith's clocks in the past
using a 9 volt transistor radio battery: I use a small battery like that,
because it cannot supply a great deal of current. Do remember, Smith's clocks
must be started. The pull button on the front moves the mechanism back to the
point I mentioned earlier where the coil is energized.
I met a gentleman at the Western Washington All British Field Meet several
years ago, Stephen Golde. He rebuilds Smith's clocks and gives a lifetime
warrantee on his work! I have his business card from our meeting and he can
be reached at:
Fine British Cars Rolls Royce and Bentley (Parts, Service and Engineering)
P.O. Box 7234 Depot 4 Victoria, B.C. Canada V9B 4Z3
tel & fax # (604) 474-7624 (area code may be out of date)
I have delivered clocks to him at the WWABFM and picked them up from him
repaired at the Portland, Oregon ABFM. He travels the ABFM circuit throughout
the world. I hope this helps!
Jim Leach, Seattle
u Received: from disco.imag.net [204.244.225.25] by in1.ibm.net id 919344995.117580-1 ; Thu, 18 Feb 1999 13:36:35 +0000
Thu, 18 Feb 1999 06:35:00 -0700 (MST)
Date: Thu, 18 Feb 1999 08:34:45 -0500
From: Ian Spencer <toyguy@gte.net>
Organization: sunbeamalpine.com
To: JPKKMK@aol.com, "alpines@autox.team.net" <alpines@autox.team.net>
Subject: Hagerty Insurance
This is for Chris and everyone who jumped in on the Hagerty Insurance discussion
yesterday. They are on the net at<http://www.hagerty.com>. There, you will find
a toll free number and you should be able to get all of your questions answered.
This is an agreed value policy, with one liability charge per collection ( NOT
per car!). There is also no deductible, I told someone yesterday that there was
one, I was wrong. Rates are .60 per thousand, plus the liability charge for the
first car. To give you all an idea, I had no problem getting 25,000 on my Series
'A' Harrington. I am paying 160.00 per year with no driving restrictions. Adding
a second car won't cost much extra, so it makes it affordable for greedy guys
like me who can't just own one. I encourage everyone to check them out!
Good Luck!
Ian Spencer
ian@sunbeamalpine.com
www.sunbeamalpine.com
JPKKMK@aol.com wrote:
> Chris,
> I use Hagerty Classic Insurance. I had no problem getting my Harrington
> insured for top dollar value, my regular insurance company just laughed at
> me. They don't have any mileage restrictions and are very affordable. I have
> brocheures if anyone needs one.
> Ian Spencer
>
> I would very much like a brochure or a phone number for Hagerty Classic
> Insurance
> Patrick King
> jpkkmk@aol.com
> 2193 Willester Ave
> San Jose, CA 95124
>
> Thank you!
0Received: from disco.imag.net [204.244.225.25] by in2.ibm.net id 919905869.164618-1 ; Thu, 25 Feb 1999 01:24:29 +0000
From: jon <jon@rdswire.com>
To: "'jerome@supernet.ab.ca'" <jerome@supernet.ab.ca>
Subject: rdwire.com info request
Date: Wed, 24 Feb 1999 16:45:40 -0800
boundary="---- =_NextPart_000_01BE6015.1D659990"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------ =_NextPart_000_01BE6015.1D659990
charset="iso-8859-1"
BRIDGE Scientific Services
Jerome Yuzyk
780.448.1434
780.468.9453 Fax
jerome@supernet.ab.ca
Edmonton, AB
You wrote:
I am trying to locate a source for 16ga striped wire, suitable for
automotive (1960s Lucas) applications. I need 6m maximum of each of GB,
GU, GY, NG, NB and NW. I could be interested in small rolls if I could
afford it. I would appreciate a catalogue in any event.
Thanks.
Jerome,
I am not certain what colors you are indicating in you 'message'
(spelled correctly this time). We offer several types of wire which can
be used in automotive applications. The most common type of insulation
is PVC, and it can be made in many different insulation sizes. I am
attaching two WORD documents which will give the most likely wire types
possibilities (at this time we do not have a published catalog).
The minimum quantity for striped wire is 100' per stripe. We do not
keep pre-striped wire in stock, but we can add the stripe to the wire
within 3 to 4 days of an order.
UL1007-16-26-*/* 100ft min./color $ .20/ft
UL1015-16-26-*/* 100ft min./color $ .24/ft
* color or stripe color
Please let me know if you have any questions.
Thank you for the inquiry.
Jon Stott
RDS Wire & Cable
Jon@rdswire.com
------ =_NextPart_000_01BE6015.1D659990--
¯Received: from disco.imag.net [204.244.225.25] by in4.ibm.net id 920650457.53520-1 ; Fri, 05 Mar 1999 16:14:17 +0000
Fri, 5 Mar 1999 16:13:16 GMT
Date: Fri, 5 Mar 1999 15:59 +0000 (GMT Standard Time)
From: midshires@cix.co.uk (Andrew Emmerson)
Subject: Re: WE/AT&T Paint & Process
To: jerome@supernet.ab.ca
Hallo there!
You might care to start importing this stuff... UKP1 = US$1.6 approx.
Plastic Polish
--------------
Despite the boring-sounding name, Paste Polishing No. 5, is known to
connoisseurs as the ideal material for cleaning bakelite and other
plastics (even plastic baths!). Unlike Brasso and other liquid polishes,
it leaves no active residue, and as it also contains a waxy agent, it also
gives a gloss finish. Paste Polishing No. 5 is the stuff the Post Office
used to polish up their old bakelite phones and is marvellous stuff - ask
any user! Unfortunately the demand for it is reduced nowadays (BT doesn't
need it now!), so it is only manufactured at intervals. You can buy it in
small quantities under the name Baykobrite from The Radiophile,
'Larkhill', Newport Road, Woodseaves, Stafford, ST20 0NP at UKP1.95 a tube
plus postage. Larger quantities and trade supplies at much lower
prices from Greygate Chemical Company, Fir Tree Lane, Groby, Leicester,
LE6 0FH (011 44 116-287 7777 from the USA, fax 011 44 116-231 1944). They
also make special liquid polish for Perspex-type plastics (as used on
fighter plane cockpits).
Regards,
Andrew Emmerson, Northampton, England.
tel: 07000-405625, international +44 1604-844130
fax: 01604-821647, international +44 1604-821647
Received: from disco.imag.net [204.244.225.25] by in6.ibm.net id 922818154.288348-1 ; Tue, 30 Mar 1999 18:22:34 +0000
Tue, 30 Mar 1999 11:16:03 -0700 (MST)
From: "Bob Douglas" <b_s_d@hotmail.com>
To: cs_tscg@bellsouth.net
Subject: Re: La Carrera Sunbeam:brakes
Date: Tue, 30 Mar 1999 10:16:15 PST
>From: Chris Stephenson <cs_tscg@bellsouth.net>
>I need to send my brake booster to someone for rebuilding. Is Smitty
>the preferred choice? What about for front brake calipers, master
>cylinder, etc. Bob Douglas send a post the other day about getting >his
master cylinder re-sleeved. Which source did you use, Bob?
>Was anything ever posted about the use of stainless steel brake
>lines? I would like to get mine replaced too. They will not be the
>same as as Series II due to the brake booster though.
There have been several good recommendations on the list for sleeving. I
went with George Frechette. It cost $60 + $8 S&H. I had it shipped
and returned within two weeks. This info is from his ad in Hemmings:
BRAKE cylinder sleeving with stainless steel, masters, $60;
clutch, wheel, calipers, $40; plus shipping; guaranteed work
and quick return. George Frechette, 14 Cedar Dr, Granby,
MA 01033, PH: 800-528-5235.
I've been talking with Classic Tube (http://www.classictube.com/) about
the stainless lines. Unless someone sends me some bad news about these
guys, I'm going to pull my brake and clutch lines this weekend and send
them off to them. They sell a set for one of the Tiger Mks, so suspect
there's some on the Tiger list that have worked with them before.
The guesstimated price is $185-$200. Standard steel is only $10-$20
less. They said standard is rated at 3K PSI bust pressure while the
stainless is 6K. I know material is only one factor, but it surprised
me as being opposite of what I expected. Assuming I go through with
this, I'll post the actual price once they have a chance to look a the
lines.
Regards, Bob Douglas
W
Received: from superman.imag.net [207.200.148.6] by in4.ibm.net id 925400916.28080-1 ; Thu, 29 Apr 1999 15:48:36 +0000
Thu, 29 Apr 1999 09:45:02 -0600 (MDT)
From: "Jay Laifman" <Jay_Laifman@countrywide.com>
To: alpines@autox.team.net
Date: Thu, 29 Apr 1999 08:25:08 -0700
Subject: Re: Whitewalls
Here is one of those e-mails from a year ago about white walls.
---------------------- Forwarded by Jay Laifman/Attorney/Legal/CF/CCI on
04/29/99 08:24 AM ---------------------------
Rootes@aol.com on 06/22/98 06:04:30 PM
To: Jay_Laifman@countrywide.com
Subject: Re: Whitewalls
In a message dated 98-06-22 20:48:00 EDT, you write:
<< I really do not want to give up my Michelins
or pay the amount necessary to get Coker tires. I noticed in looking at
an
old Horn that one of the options that the factory offered at one time were
"fake" whitewall trim rings. Does anyone know anything about these? Just
thinking about them, it seems that they are a frisbee waiting to be flung.
>>
Jay -
I must also confess to liking early Alpines with wide whites, and
will
have them on my Humbers when funds allow it!
The whitewall trims are quite popular in the UK. I see them
frequently
on cars in Practical Classics magazine (GREAT mag!), and they advertise
them
WHITEWALL TRIMS - Bravado Automotive - 32.00 BPS set of 4, 37.50 BPS set
of
5, including VAT and post (UK, I would presume) Superwide and Colourwall
trims also available - please enquire. e-mail:
bravado@cerbernet.co.uk
As to flying off, from what I understand, the trims must be put
in
place before the tire bead is seated, and the tire pinches the trim between
itself and the rim. It would be pretty hard to spin that sucker off, I
would
imagine!
Hope this helps!
Jon Arzt Rootes@aol.com
Received: from disco.imag.net [204.244.225.25] by in2.ibm.net id 921094616.108974-1 ; Wed, 10 Mar 1999 19:36:56 +0000
Wed, 10 Mar 1999 19:35:56 GMT
Date: Wed, 10 Mar 1999 19:36 +0000 (GMT Standard Time)
From: midshires@cix.co.uk (Andrew Emmerson)
Subject: Paste Polishing No. 5
To: jerome@supernet.ab.ca
Hallo again,
OK, I now have full costings (all in UK pounds):
two tubes of Past Polishing No. 5 at 2.00 each 4.00
air mail small packet postage 1.84
banking your money order 0.80
----
Grand total 6.64
----
Please ensure that your bank draft is made out in pounds and drawn on a
British bank (most overseas banks have a London partner bank for this kind
of thing).
Then send it to:
Andrew Emmerson
71 Falcutt Way
Northampton
NN2 8PH
ENGLAND.
Thanks and all the best,
Andrew Emmerson
tel: 07000-405625, international +44 1604-844130
fax: 01604-821647, international +44 1604-821647
“Received: from superman.imag.net [207.200.148.6] by in6.ibm.net id 928990956.281296-1 ; Thu, 10 Jun 1999 05:02:36 +0000
Wed, 9 Jun 1999 23:03:58 -0600 (MDT)
From: "Patrick Wheeler" <pwheeler@ix.netcom.com>
To: <alpines@autox.team.net>
Subject: RE: Lots of used parts
Date: Wed, 9 Jun 1999 21:47:17 -0700
charset="iso-8859-1"
Importance: Normal
Ah-Ha, found the list. Following is a list from Joe Misuraca at (714)
558-1145. No guarantees and usual disclaimers apply, (I do claim all the
typos as mine however;-), but here goes:
Soft top frame
rocker cover
drive shafts
rocker shaft set
Alpine aluminum Heads
Hillman Cast iron heads
intake manifolds, aluminum and cast iron
timing covers
sprockets + timing chains and tensioners
exhaust manifolds
crankshaft pulleys
front disk rotors
radiators
heater cores
fuel pumps
rear axles w/ bearings
rear brake drums
Alpine wheels, also spoke wheeles and hubs
starters
alternator
gages, RPM, Temp, Oil, Fuel, Speedo
Tail light parts
oil pumps
oil pans
rear light parts
distributors
sway bar
wiper motor
heater motor
drive shaft
rear ends (3.89 + 4.22)
He's also got a 67 Alpine w/ hard top (white) for sale, around $5k.
-Patrick
SV, Richmond, CA
> -----Original Message-----
> From: owner-alpines@autox.team.net
> [mailto:owner-alpines@autox.team.net]On Behalf Of Patrick Wheeler
> Sent: Wednesday, June 09, 1999 9:34 PM
> To: CANISDOG@aol.com; alpines@autox.team.net
> Subject: RE: Lots of used parts
>
>
> I'll vouch for Joe. He came through with a set of late, 'non-hooded'
> headlight rims for me as well as a new/used windshield pump when no other
> source could be found. Price was right, goods were as advertised, and he
> seemed a _real_ gentleman. Cannot ask for more. He sent me a
> list of parts
> he's trying to get rid of, which I have mis-placed (I set it someplace
> special so as not to lose it, sound familier?). Soon as I find
> it I'll pass
> it along.
> -Patrick
> SV (may be out of the body shop this week, 6 months after accident)
> Richmond, CA
>
> > -----Original Message-----
> > From: owner-alpines@autox.team.net
> > [mailto:owner-alpines@autox.team.net]On Behalf Of CANISDOG@aol.com
> > Sent: Wednesday, June 09, 1999 5:16 PM
> > To: alpines@autox.team.net
> > Subject: RE:Lots of used parts
> >
> >
> > In a message dated 6/9/1999 2:42:18 PM Mountain Daylight Time,
> > Christopher.Albers@bubbs.biola.edu writes:
> >
> > << All,
> > a friend of mine and fellow 'Beamer asked me to remind everyone that
> > he has LOTS of used parts such as some overdrive (early) stuff, wire
> > wheels and hubs (some new hubs), engines, tranny's, suspension, diff's,
> > electrical, gauges, interior, etc.
> > His name is Joe Misuraca, an extremely nice and knowledgeable fellow.
> > His number is (714) 558-1145. Tell him Christopher sent you.
> >
> > Christopher >>
> >
> > I hope this is not another "bus full of parts story" I bought
> > off on that
> > one and have yet to get a single part. Even after begging the
> > guy for his
> > address so I could send money. Maybe I really got lucky.
> >
> > Paul
> > Colorado
> > S 3 GT
> >
>
>
>Received: from ns3.imag.net [207.200.148.6] by in5.ibm.net id 929970790.50240-1 ; Mon, 21 Jun 1999 13:13:10 +0000
Mon, 21 Jun 1999 07:14:51 -0600 (MDT)
From: tjhiggin@chris.iss.ingr.com (T.J. Higgins)
Subject: OVERDRIVES FITTED TO ALPINES, RAPIERS ETC... (fwd)
To: alpines@autox.team.net (Alpines)
Date: Mon, 21 Jun 99 8:10:10 CDT
ODSPARES@aol.com writes:
> Sir,
>
> Our company specialises in reconditioned Laycock de Normanville overdrive
> units and can supply a full and comprehensive parts service. With over 45
> years of experience from our partners (Ex-Laycock International Service
> Engineer) we can offer FREE TECHNICAL ADVICE to your members. Credit
> card/mail order both national and international.
>
> Contact:
> O/D SPARES
> UNIT A2 WOLSTON BUSINESS PARK
> MAIN STREET
> WOLSTON
> NR COVENTRY CV8 3FU
>
> TEL: 01203 543686
> FAX: 01203 544973
> E-MAIL: ODSPARES@AOL.COM
>
³ Received: from superman.imag.net [207.200.148.6] by in1.ibm.net id 931874213.62990-1 ; Tue, 13 Jul 1999 13:56:53 +0000
Tue, 13 Jul 1999 07:46:14 -0600 (MDT)
From: "Morris, Quentin J" <Quentin.Morris@PSS.Boeing.com>
To: "'Alpines'" <alpines@autox.team.net>
Subject: RE: Electronic Ignition
Date: Tue, 13 Jul 1999 06:47:02 -0700
All,
After following the on-line discussion of the Pertronix ignition system, I did some research on the web. I contacted them via their site and received a call back after some three weeks, but the rep offered the system to me for $69, i.e. $10 off the list price. Feedback from users, especially daily drivers, was unanimous...a great investment for savings in fuel economy and time. Plus, it is totally contained under the distributor cap.
The rep that assisted me, Jim, can be reached @ 800.685.1492.
"Q"
> ----------
> From: Jarrid Gross[SMTP:JGross@econolite.com]
> Reply To: Jarrid Gross
> Sent: Monday, July 12, 1999 4:11 PM
> To: 'jumpin'jan'; 'kasl'
> Cc: 'Alpines'
> Subject: RE: Electronic Ignition
>
>
> >Brent,
> > It seems to me the way to go is the Pertronics kit which sells about
> >$80.00. At the Cincinnati British car meet, this past weekend, I was
> >talking to Mark Weber (owner and driver of a fine looking MGB
> >E-production race car, #19X) about his digital ignition system that he
> >said costs about $200-$300 and its operating principle is very simular
> >to todays computer controlled system. It uses a crank position sensor
> >that fires a two coil system. No moving parts except for the shaft
> >encoder disk that can fit on the crank pully (looks about to be 8 inch
> >diameter, thin disk). Anyone know of vendors to buy these things from,
> >forward the info to me and I'll post it on sunbeamalpine.org
> >Jan
>
>
> The system to which you speak is most likely the electromotive Tech3.
>
> It is laptop programable, and allows you to set your own curve.
>
> Few racing orgs will allow its use, except for contemporary racing.
>
> This system is overkill for most ignition needs, but van be handy
> to dial in all the ignition based improvements you can get.
>
>
>
> I have a friend who distributes for electromotive.
>
> His name is Lance Nist (949) 250-1797.
>
Received: from superman.imag.net [207.200.148.6] by in5.ibm.net id 930927518.88448-1 ; Fri, 02 Jul 1999 14:58:38 +0000
Fri, 2 Jul 1999 08:56:18 -0600 (MDT)
From: "Jay Laifman" <Jay_Laifman@countrywide.com>
To: alpines@autox.team.net, tigers@autox.team.net
Date: Fri, 2 Jul 1999 07:49:02 -0700
Subject: Pertronics Source
Someone asked for a good source for Pertronics. I just called ASE Supply
in Oregon at (800) 289-2737. They wanted $51.75 for my 911. That's about
half the price of what they are sold for elsewhere.
Jay
rReceived: from superman.imag.net [207.200.148.6] by in6.ibm.net id 932873865.91168-1 ; Sun, 25 Jul 1999 03:37:45 +0000
Sat, 24 Jul 1999 21:37:14 -0600 (MDT)
From: Alpdavegre@aol.com
Date: Sat, 24 Jul 1999 23:34:05 EDT
Subject: Re: 289 Harmonic Balancer
To: tym@mediaone.net, Tigers@autox.team.net, Alpines@autox.team.net
Tym,
In response to your inquiry on a harmonic balancer. If your old balancer is
okay except for the rubber you might want to try having it revulcanized. I
had my Mk 1 260 dampner done by Dampner Dudes, 5509 Cedars Rd., Redding, Ca.
96001. tele 530-244-7225. I talked to Matt. I had to pay shipping to them.
Turn around time was about 1 week and they sent it back. It looks great, even
painted and a speedi sleeve on the seal area. Price was $66. Much better than
buying a new balancer at $140 and it wasn't the correct weight! I believe
they can do any balancer so Tigers and Alpines could benefit from them. My 2c
worth.
Dave Green
8 Alps, 1 Tiger.
Index Accessories Culture Diagnose Docs Howto Id Models Parts-Alt Performance Rebuild Rebuild-Body Rebuild-Electrical Rebuild-Engine Rebuild-Interior Rebuild-Tranny Rebuild-Underside Shoptools Sources Specs |
Sunbeam Alpine technical info
Posted - 28 Nov 2010 : 22:49:57
