T O P I C R E V I E W |
72RPR |
Posted - 31 Jul 2019 : 06:03:32 Hello members, I have installed electronic ignition in my Rapier FB and was seeking advice on what plug gap setting should I use. I run on Aus 98 octane unleaded fuel and am using N9Y equivalent plugs, (NGK BP6ES). Thanks in advance |
4 L A T E S T R E P L I E S (Newest First) |
jimlagos |
Posted - 29 Aug 2019 : 17:15:28 Although I don't believe it's necessary, you could slightly increase the spark plug gap and take advantage of a "meatier" spark. I opened mine to .030 from .025. Not sure if it made any difference though!
jim |
72RPR |
Posted - 26 Aug 2019 : 01:06:58 Hi bigaadams, yes, I have a matching high output coil fitted. |
bigaadams |
Posted - 23 Aug 2019 : 13:39:34 If you did not change your ignition coil, only the trigger to the coil has been affected by the electronics. If you up the secondary output only then will this necessitate a spark gap change. |
pruyter |
Posted - 31 Jul 2019 : 09:01:56 It should be: .025 inch (.635 mm)
Regards,
Peter |